ZoneFlow

Replacing a YAML irrigation setup

Already watering with your own automations or scripts? You do not have to switch in one go. The safest order is to let ZoneFlow run next to the old setup first, prove the wiring, and only then retire the old one.

Step by step

  1. Install ZoneFlow next to what you have. Leave your existing automations switched on for now.
  2. Test the wiring. Press the zone's Service Run 1 min button, or call zoneflow.test_pulse with seconds: 10. These runs skip every schedule and rain gate deliberately and are never counted as watering. Use them to check that the valve switches, that the pump-power sensor or flow meter reads, and that a row appears in the CSV log.
  3. Watch the numbers for a few days. Compare ZoneFlow's diagnostic sensors (rain windows, 3-day average peak temperature, next-irrigation estimate) with what your old setup does.
  4. Switch over. Once you are satisfied, disable the old automations and let ZoneFlow take the schedule.

If the plant already has a watering history, seed the Last Routine and Last Deep Soak dates so it is not treated as overdue. Set the flow rate too, since that is the one number that has to be right.

Going back

Re-enable your old automation and disable the ZoneFlow entry: Settings, Devices and Services, ZoneFlow Irrigation, the three-dot menu, Disable. The two keep their state separately, so neither one damages the other.