CSV event log and diagnostic sensors
ZoneFlow keeps two kinds of record for every zone: a file you can open in a spreadsheet, and a set of read-only sensors you can put on a dashboard.
The CSV file
Every watering, every skipped watering and every warning is appended to a CSV file along with the figures behind it. That means you can go back later and see not just that a zone skipped, but what it was looking at when it decided.
- Where it lives. You pick the path in the setup form. If you leave it alone, the file name is built from the zone's name.
- One file per zone. Each zone has its own path.
- Always English. Everything else in ZoneFlow follows Home Assistant's language, but the log stays in English so older and newer rows read the same.
When a zone did not water and you want to know why, read the log row next to the zone's Status sentence. Why didn't it water today? walks through that with real examples.
Diagnostic sensors
These sensors sit under Diagnostic on the zone's device page. They report; they never change how the zone waters.
About timing and amount
- Days until next run and Next irrigation estimate: when ZoneFlow expects to water next. The estimate is hidden by default because the days figure says the same; it still works and can be unhidden in the entity's settings.
- Weekly target and where it came from: the amount it is aiming for and where that figure came from.
About weather and demand
- Rain windows: how much rain has fallen over the rolling periods the rain credit looks at.
- Reference ET₀: the evapotranspiration figure used when the ET curve is switched on.
About the zone itself
- Measured last-cycle water: what the flow meter recorded for the most recent cycle, if the zone has one.
- Soil-moisture status: what the soil-moisture probe is currently contributing.
- Deficit-mode status: whether the controlled-stress mode is active.
If you are reporting a problem, the device page's Download diagnostics button bundles what is needed in one file.