- Set up with an AI assistant
Let Claude, ChatGPT or another assistant interview you and configure your zones.
- Calibration: flow rate, litres and rain gauge
One number decides how much water your plants get. Three ways to set your flow rate, plus litres and tipping-bucket rain gauge calibration.
- Rain gauges and weather stations
Use a tipping bucket or a weather station's rain total, rate or per-reading sensor. Which type to pick for Ecowitt, Ambient, Tempest, Netatmo and Davis.
- Rain without a gauge
No rain gauge? Type in the rain you read by hand, or borrow it from nearby weather stations.
- What each sensor adds
Which optional sensors add which capability, and what happens when one fails.
- Areas, plants and presets
Group zones into parts of the garden, keep a history for each plant, and start a new bed from one that works.
- Dashboard cards
Start with a ready-made dashboard that builds itself, then the per-zone card and the all-zones overview card.
- Status, notifications and repairs
The plain-language Status sensor, per-zone notification levels, the weekly summary, and self-clearing Repairs.
- Multiple zones and shared pumps
Add one zone per valve and make zones that share a pump take turns.
- Schedules and cadences
Deep soak versus routine watering, fixed times, and sunrise or sunset scheduling.
- Growth ramp and climate
Pick a climate at setup and let young plants ramp up from a planting date.
- Frost guard and Pause
Stop ZoneFlow watering in freezing weather, and switch a zone or area off for winter, a holiday or a repair.
- Greenhouse and indoor zones
Run a greenhouse or indoor grow space: fans, vents, misters and a heater, with sensor failsafes.
- Service runs and Service Mode
Check drippers, flush lines or find leaks without disturbing the schedule.
- Snooze Today and self-tuning
Skip a day, switch deep soak off, and how repeated manual presses adjust the dry-down.
- Metric and imperial units
Choose units per zone. Watering is always calculated in metric.
- Health journal, fertilizing and history
Keep notes on a plant, get a fertilizing reminder, and enter past watering dates so a plant you already grow is not treated as overdue.
- CSV event log and diagnostic sensors
Where each zone's run, skip and warning history is written, and the read-only sensors that show what ZoneFlow is planning.
- Services
The zoneflow.* services you can call from automations and scripts.
- Languages
ZoneFlow switches language with Home Assistant. Here is what is translated, what is not, and how to help fix a translation.
- Replacing a YAML irrigation setup
Move from hand-written irrigation automations to ZoneFlow in four steps, with the old setup left in place until you trust the new one.
- Testing and the sandbox
Three ways to check ZoneFlow's behaviour without a real valve: the pytest suite, a season simulator and a Docker sandbox.
- How much water: the settings
What each setting in the How much water group does, its starting value and how to pick yours.
- Rain, forecast and frost: the settings
How much rain counts, when heavy rain holds watering back, when a forecast skips it and when cold stops it.
- Deep soak: the settings
The big, slow watering for deep roots: depth, interval, rain limits, pulses and its safety cap.
- Soil: the settings
Soil type, drainage, slope and mulch, and what a soil moisture probe may decide.
- Growth: the settings
The growth ramp: less water for young plants, growing to the full weekly target.
- Deficit mode: the settings
Give a set share of the normal water for a while, on purpose: when it helps, how much, and the guardrails.
- Safety limits and pump: the settings
Runtime caps, the daily cap, the pump power warning and the settings for a shared pump.
- Valve backup timer
Why to set a timer on the valve itself, how long it must be, and how ZoneFlow checks it.